DL420CVT-5

Doosan Wheel Loader DL420 CVT-5 is equipped with continuously variable transmission (CVT). High loads at low engine speeds, in combination with high dynamics, are the outstanding requirements for any type of wheel loader operating cycle. DL420CVT-5 loader is your solution.

Hydrostatic-mechanical power split allows us to change the engine from Scania DC13 to DC09 as CVT maintains machine efficiency even at low engine rpm. This combination leads to minimum fuel consumption and maximum productivity, together with high driving comfort in two machine modes.

Download Brochure Find a Dealer

General Purpose Buckets

Rehandling Configurations (Bolt-on Edge)

Straight side cutter 2995 mm 4.3 m³
Convex side cutter 2995 mm 5.3 m³
Straight side cutter 3200 mm 4.5 m³
Convex side cutter 3200 mm 5.5 m³

General purpose configurations (teeth)

Straight side cutter 2995 mm 4.2 m³
Convex side cutter 2995 mm 5.1 m³
Straight side cutter 3200 mm 4.4 m³
Convex side cutter 3200 mm 5.4 m³

Download Brochure

Machine Specs

Operating weight 23.080 kg
Bucket capacity 4.2 m³
Engine type Scania DC09
Rated engine performance (SAE J1995 gross) 311 HP (232 kW) @ 1800 rpm
Max. torque at rpm 1.830 Nm @ 1.200 rpm
Breakout force 210 kN
Static tipping load (straight / 40°) 18.400/ 16.300 kg
Turning radius (tyre edge / bucket edge) 6.970 / 6.570 mm
Height at bucket pivot point mm 4280 mm
Standard tyres 26.5 R25 (L3)

Request a Quote

Locate Your Dealer

Enter a zipcode/city to find your nearest dealer.